09.09.2019

Aktualizacja oprogramowania dla serii urządzeń Vigor 2133

Nowa wersja oprogramowania dla serii urządzeń Vigor  2133

DrayTek udostępnił nową wersję firmware dla serii  urządzeń Vigor 2133  o oznaczeniu 3.9.1. Aktualizacja w wersji angielskiej dostępna jest do pobrania w dziale firmware.

Improvement

  • Corrected: 3G WAN in PPP mode was disconnected frequently.
  • Corrected: Could not use # as WLAN SSID.
  • Corrected: Wireless 802.1x connections were blocked intermittently.
  • Corrected: Send Auth code via custom SMS profile always failed (configured on System Maintenance>>Administrator Password Setup, for 2-Step Authentication).
  • Corrected: If the hardware accelerator was enabled, the IPTV STB was unable to load middleware webpage correctly.
  • Corrected: IPTV did not resume after 5 minute pause.
  • Corrected: Vigor router would reboot when an OpenVPN client tried to connect.
  • Corrected: When IGMP fast Leave was disabled, IGMP streams were stopped still.
  • Corrected: Vigor router failed to connect 3rd party ACS in HTTPS.
  • Corrected: Abnormal status displayed on the router’s external device page (Switch connect to tagged VLAN).
  • Improved: Exclude VigorACS server packet from Brute force attack detection.
  • Corrected: Policy routes with different NATed VPN interfaces could not work when there were more than one NATed VPN tunnels were established.
  • Corrected: Failed to create IKEv2 EAP connection from Windows 10 when using self-signed CA.
  • Corrected: Acme client error log was displayed when there was no DDNS setup.
  • Corrected: DrayDDNS profile was disabled unexpectedly.
  • Corrected: Incorrect port status was displayed in ARP table when the device was connected to 2.4G/5G by WDS.
  • Corrected: Failed to register to VigorACS server.
  • Corrected: The telnet command, ‘ipf flowtrack set -e’, did not work.
  • Corrected: Popped up the message window of „Error Password cannot be null” for an IPsec VPN profile.
  • Corrected: SSL VPN client obtained DNS server address via router’s WAN instead of DHCP Relay server.
  • Corrected: Bandwidth Management for Wireless 5GHz displayed wrong results of upload & download speed.
  • Corrected: Hotspot web portal did not work with Facebook. Unable to use the button „Login with Facebook”.
  • Corrected: Unable to set LAN to LAN VPN profile with IKEv2 EAP, encrypted with AES authentication.
  • Corrected: Payment device via TLS issue, Router didn’t send “ACK” packet at end of session.
  • Corrected: The SSH client would receive an error message when he/she tried to disconnect the SSH session.
  • Corrected: Landing page disappeared on android quickly when using hotspot web portal.
  • Corrected: Router rebooted while receiving a specific 802.1x EAP_PEAP/MSCHAPv2 authentication request.
  • Corrected: Unable to display the routing table for WAN connection set with DHCP option 121.
  • Improved: Enhance NAT performance when disabling Data Filter in the Firewall.
  • Corrected: Smart VPN Client download link directed to the wrong pages.
  • Corrected: Failed to create IKEv2 EAP connection from Windows 10 when using Let’s Encrypt Certificate.
  • Corrected: Unable to set Phase 1 and Phase 2 via VigorACS / TR069.
  • Corrected: Could not use character \ for user name of Remote Dial-in User and “\u” crashed Remote Dial-in User menu.
  • Corrected: Unable to restore configuration with password. No pop-up window appeared to enter the password.
  • Corrected: Unable to specify Username / Password on LAN to LAN VPN profile for Dial-Out Settings, IPsec XAuth & IKEv2 EAP.
  • Corrected: Enabled “Always pass inbound fragmented large packets” option blocked incoming VoIP calls with fragmented SIP invite packets.
  • Corrected: Failed to update Dynamic DNS setting with the service provider of OpenDNS.
  • Corrected: Set a filter rule on the Firewall >> Filter Setup via Wizard Mode. However, if checking the just created filter rule with Advance Mode, the direction interfaces were unchecked on Direction Advanced dialog.
  • Corrected: Router rebooted while a Remote dial-in IPSec IKEv2 VPN connection came in.
  • Corrected: WAN>>Multi VLAN>>WAN4 could not be configured by VigorACS. WAN wouldn’t come online.
  • Corrected: Custom DDNS updates failed with „goip.de” when using HTTPS as thet connection type.
  • Corrected: WEB GUI Captcha took more than 4 letters and still worked.
  • Corrected: The created ROOT CA would be valid after 10 minutes.
  • Corrected: WLAN authentication via WPA2/802.1X with RADIUS server in remote VPN subnet needed always 7 tries.
  • Corrected: Current Time was invalid on Dashboard.
  • Corrected: User profile > Quota reset at the start time of schedule function did not work.
  • Corrected: Unable to use port 1194 even OpenVPN service was disabled.
  • Corrected: SNMP replied from the wrong host (router instead of AP).
  • Corrected: Router rebooted constantly after restoring a specific configuration file.
  • Corrected: Router rebooted as soon as the SSH session from a LAN PC times out.
  • Corrected: The WUI favicon was not displayed with Chrome (Firefox works).
  • Corrected: Policy routes with different NATed VPN interfaces did not work when there were more than one NATed VPN tunnels established.
  • Corrected: The telnet command, ‘srv dhcp public start’, did not work.
  • Corrected: The firewall was unable to block LAN client with static IPv6 address in VLAN.
  • Improved: Support the IP Group as Source IP on NAT or Port Redirection/Open Ports.
  • Improved: Support the option to turn off CPE notify log and change the default as disabled.
  • Improved: Support SIP alias number.
  • Improved: Add the MyVigor Services>>Service Status page to display the service activation information.
  • Improved: SSH Cipher improvement.
  • Improved: Improve the DHCP option 43 with 184 character length.
  • Improved: Add Search Bar to the left menu on the homepage.
  • Improved: Support VoIP QoS on VigorACS (TR-069).
  • Improved: Add a VPN username inspection mechanism.
  • Improved: Update and add more help links in GUI.
  • Improved: Channel list and note suggestion for Central Management >> AP >> WLAN Profile.
  • Improved: Easier way to clear space on USB drive.
  • Improved: Re-arrange / unify VPN type WUI.
  • Improved: Change the message wording for 2-Step Authentication.
  • Improved: WUI suggestion for SMS Profile / Mail Profile fields on Applications >> SMS / Mail Alert service.
  • Improved: The IP address can be selected as a provider host in customized DDNS profile.
  • Improved: Simplify the process of QoS Class Rule Setup.
  • Improved: Change the spelling of Openvpn to OpenVPN on VPN and Remote Access >>Remote Dial-in User.
  • Improved: Add DHCPv6 with Prefix Delegation for WAN interface.
  • Improved: Add the field of „Server Response” for the Custom SMS Service Object on Objects Setting >> SMS/Mail Service Object.
  • Improved: Add QoS status for each WAN/Class and also VoIP status information
  • Improved: Add the pound (#) character as number setting for TR-069 parameter.
  • Improved: Move System Maintenance >> Activation page to independent option and add more information.
  • Improved: Support Logging USB Temperature via SNMP.
  • Improved: Support the TR-069 parameter to execute the telnet command.
  • Improved: The Printer Server setting on USB Application >> USB General Settings is disabled in default.
  • Improved: Enlarge the size of the checkbox in the Web portal login page.

W tej witrynie stosujemy pliki cookies. Standardowe ustawienia przeglądarki internetowej zezwalają na zapisywanie ich na urządzeniu końcowym Użytkownika. Kontynuowanie przeglądania serwisu bez zmiany ustawień traktujemy jako zgodę na użycie plików cookies. Więcej informacji w Polityce Cookies.

Akceptuję